Welcome to our store Learn more

Products

ToughTek™ 3/8-inch Hose for Drone Pressure Washing
A Frame 450' Pressure Washer Hose Reel
Tough Tek 3/8" Rubber Pressure Washer Hose Reel

BluShield ToughTek™ 3/8-inch Hose for Drone Pressure Washing

  • Optimized for drone washing setups – Strong yet flexible construction supports long vertical and horizontal runs without performance loss.
  • Handles extreme PSI reliably – Designed for professional-grade pressure systems used in drone-assisted exterior cleaning.
  • Abrasion-resistant outer jacket – Withstands rooftop edges, concrete, and repeated ground contact during drone operations.
  • Consistent flow = predictable cleaning – Maintains steady pressure to your drone for safer, more controlled cleaning passes.
  • Trusted by commercial drone crews – Engineered for operators who demand reliability on high-rise, large-scale, and time-sensitive jobs.

Specifications

Primary use: Drone pressure washing, glass and solar cleaning
Construction: Kevlar reinforced, abrasion-resistant jacket
Diameter: 3/8-inch
Working pressure: 4000 PSI
Burst pressure: 16,000 PSI
Length options: 50 ft / 100 ft
Weight: 6.26 (50ft) | 8.46 (100ft) Lbs
Dimensions: 12 x 13.5 x 12 Inches

BluShield Steel A Frame 450' Pressure Washer Hose Reel

  • Built for long drone runs – Holds up to 450 feet of hose so you can maintain safe ground distance while reaching multi-story structures with ease.
  • Rock-solid steel A-frame – Eliminates reel flex and vibration during rapid payout and rewind, even under high-pressure drone operations.
  • Built for mobile drone rigs – Designed for trailer, truck, or skid setups, with smooth rotation and a stable base that reduce setup time and help complete more jobs per day.
  • Protects your hose investment – Keeps hoses clean, untwisted, and off the ground, extending hose life in demanding drone workflows.
  • Field-proven durability – Designed for professional crews who run high PSI daily and can’t afford equipment failure mid-job.

Specifications

Primary use: Drone pressure washing, glass and solar cleaning
Construction: Rugged steel A-frame construction for maximum durability.
Diameter: 3/8-inch
Length options: Upto 450 ft
Weight: 23.4 Lbs
Dimensions: 25 x 18 x 19 Inches

BluShield Tough Tek 3/8" Rubber Pressure Washing Hose Reel (Dual Arm) with 6' Lead-in-Hose

  • Dual-arm strength for drone pressure – Reinforced frame prevents torque stress when feeding hose during continuous drone movement.
  • Included 6’ lead-in hose – Cleaner connections, reduced wear at the swivel, and smoother flow to your drone supply line.
  • Heavy-duty rubber hose compatibility – Handles constant high-pressure output without kinking or collapsing under drone demand.
  • Smooth hose payout for stable flight – Reduces line resistance that can affect drone balance and control.
  • Built for mobile drone rigs – Ideal for trailer, truck, or skid setups used by professional drone washing operators.

Specifications

Primary use: Drone pressure washing, glass and solar cleaning
Construction: Kevlar reinforced, abrasion-resistant jacket
Diameter: 3/8-inch
Working pressure: 4000 PSI
Burst pressure: 16,000 PSI
Length options: 50 ft / 100 ft
Weight: 44.22 (50ft) | 79.86 (100ft) Lbs
Dimensions: 22.5 x 12.5 x 23.5 Inches

Why Drone Operators choose ToughTek

Lightweight Kevlar strength

Up to 40% lighter than traditional rubber hoses, helping reduce downward load and hose drag on the drone.

Zero coil memory

Lays flat and stays flexible so the hose doesn’t snap, kink or “fight” the drone during hover and lateral movement.

Consistent high-pressure output

Engineered for 4000 PSI systems with minimal loss across long vertical elevation, keeping spray patterns stable at height.

Built for drone fleets

Durable outer jacket and robust fittings designed for daily commercial use across multi-city drone washing fleets.

Which length is right for you?

  • 3/8-inch x 50 ft

    • Best for mid-rise buildings and precise manoeuvres
    • Lowest overall weight for the cleanest flight dynamics
    • Ideal when the pump and reel are closer to the work zone
  • 3/8-inch x 100 ft

    • Best for high-rise towers and large glass surfaces
    • Fewer reel repositionings across long facades
    • Ideal for fleets servicing multiple elevations from one setup

Why ToughTek Lightweight Pressure Washer Hoses Are the Smarter Choice

ToughTek vs other 3/8-inch Hoses

ToughTek’s lightweight design reduces drag, maintains consistent pressure, and extends drone battery life for smoother, more efficient operations as compared to other generic ⅜ - inch pressure washer Hoses.

Feature
ToughTek 3/8"*100ft
Simpson 3/8"
Kobrajet 3/8"
Weight
8.46 lbs
22.1 lbs
23.8 lbs
Coil memory
Zero or ultra-low memory
Tends to kink, snap or fight the drone
Tends to kink, snap or fight the drone
Pressure stability
4000 PSI
4500 PSI
4500 PSI
Braiding
Kevlar
Polyster
Wire braid
Hot & Cold Water Compatible
Yes
No
No
Outer jacket
Abrasion & UV resistant ToughTek jacket
Polyurethane
Rubber
Drone suitability
Light Weight, Heavy Duty, Field tested with drone washing plates
Not Designed for Drones
Not Designed for Drones

1. How does the lightweight ToughTek hose help drones?

Less weight means better lift, saves battery and increases flight time, and allows easier maneuvering with minimal strain on the drone.

2. Does ToughTek maintain consistent pressure during flight?

Yes, it’s designed to deliver steady pressure even during vertical lifts and extended reach.

3. How does ToughTek reduce unwanted drone movement?

The lightweight design reduces drag and resistance, helping keep the drone stable and controlled.

4. Is ToughTek safer for drone pressure washing?

Absolutely—lighter weight and consistent pressure improve control, stability, and overall safety in flight.

5. How does ToughTek improve overall cleaning efficiency for drone operators?

By reducing hose weight and drag while maintaining consistent pressure, ToughTek allows faster, smoother passes with less battery drain and fewer flight interruptions.

Certifications & Testing

  • Pressure tested


    4000 PSI working, 12,000 PSI burst tested on every batch.

  • Flex & bend cycles

    10,000 Repeated bend tests to ensure low memory and long-term flexibility.

  • UV & weather

    Exposure tests for sun, moisture and rooftop conditions.

  • Drone field tested

    Proven performance with professional drone washing fleets.

Running a drone washing fleet?

Get special pricing and custom lengths for 5+ hoses. Ideal for operators standardising equipment across multiple drone rigs and crews.

What Drone Operators say

“We replaced all OEM hoses on our drone rigs with ToughTek. Stability in windy conditions improved and hose drag is noticeably lower.”

Phoenix Drone Wash Fleet

High-rise facade cleaning operator

““Lightweight, zero memory and tough enough for daily use. It genuinely feels engineered for drone washing, not repurposed from ground rigs.””

SkyLine Vertical Services

Multi-city drone washing fleet

““Pressure remains consistent even at 80–100 ft elevation. Our crews now request ToughTek by name for every deployment.””

Aerial CleanPro

Solar & glass drone washing

“We replaced all OEM hoses on our drone rigs with ToughTek. Stability in windy conditions improved and hose drag is noticeably lower.”

Phoenix Drone Wash Fleet

High-rise facade cleaning operator

FAQs for Drone Operators

Does the hose affect drone stability?

ToughTek is engineered with low weight and zero coil memory to minimise drag and sudden tugs, helping drones maintain stable hover and smooth lateral movement.

Can it handle long vertical runs from roof to ground?

Yes. The hose is rated for 4000 PSI working pressure with minimal pressure loss over typical drone washing heights used for mid‑ and high‑rise buildings.

Is it compatible with my existing drone wash rig?

ToughTek works with most 3/8-inch pressure washer and drone wash setups. Use your existing quick‑connects or adaptors to integrate it into the system.