Air hose reels are an essential part of your air hose compressor system. They help you wind and unwind your air hose and also provide you with a safe place for storage. In addition to this, they also help prevent trip hazards and wear on your hose.
However, once your air hose is all neatly tucked and coiled in your reel, you need a safe place to store the reel itself. This is where an air hose reel mount comes in use, and provides you with a convenient way to store your air hose reel in your workspace.
Thus, in this blog, we shall discuss some of the top air hose reel mounting ideas that you can use and implement. So, without any further ado, let’s get going.
Types of air hose reel mounts and storage
1. Wall-Mounted Air Hose Reel
A wall mount air hose reel is a setup where your air hose reel is mounted on a wall using a reel mount rack, or even a nail.
Ways to mount a reel on a wall are discussed below.
Choose a Spot - Pick a sturdy wall where you can easily access the air compressor.
Height Matters - Mount the reel high enough so the hose won't touch the ground but low enough for easy use.
Prep the Wall - Make sure the wall is clean and dry. Use a stud finder to locate studs for secure mounting.
Mark and Drill - Mark where you want to mount the reel. Drill pilot holes into the studs.
Secure the Reel - Use screws to attach the reel to the wall through the pilot holes.
This method of mounting an air hose reel saves space and also provides easy access whenever you need to use it.
2. Ceiling-Mounted Air Hose Reel
A ceiling-mounted air hose reel is one which consists of a reel mechanism which is attached to a bracket. The bracket is securely mounted on the ceiling using screws and fasteners. The hose is wound around the reel and can be easily pulled down when it is needed. It can also be retracted back when it's not in use.
An air hose reel which is ceiling mounted frees up space on the floor so that you have extra room in your workshop or garage. It also prevents the hose reel and hose from getting damaged as it is less likely someone will step on them, or get run over by equipment or vehicles.
Ways to install a ceiling-mounted air hose reel are discussed below.
Choose a Suitable Location - Select a spot on the ceiling that is easily accessible and provides enough clearance for the hose to extend and retract freely.
Locate Ceiling Joists - Use a stud finder to locate ceiling joists where you can securely mount the bracket.
Mount the Bracket - Attach the bracket to the ceiling joists using screws or bolts, ensuring it is level and stable.
Attach the Reel - Once the bracket is securely in place, attach the reel mechanism to the bracket according to the manufacturer's instructions.
3. Corner-Mounted Air Hose Reel
Corner-mounted air hose reels feature hinges that allow for convenient positioning at various angles in corners. In addition to this, a rubber protective sleeve is also present which provides rubbing resistance and keeps corners free from bends or wear-and-tear damage.
Mounting this type of hose reel requires only basic tools, making installation an effortless process that gives you quick and easy access to your hose whenever necessary and eliminates the stress associated with stringing out the hose and winding it back up again.
Steps to set up a corner-mounted air hose reel are discussed below.
Choose a Corner - Select a corner in your workspace that allows for easy access to the air compressor and provides enough clearance for the hose to extend and retract.
Mark the Mounting Location - Use a pencil to mark the position where you want to mount the reel, ensuring it's at a comfortable height for access.
Locate Studs - Use a stud finder to locate studs in the corner where you'll mount the reel for secure attachment.
Mount the Bracket - Attach the mounting bracket to the wall, ensuring it's level and securely anchored to the studs.
Attach the Reel - Once the bracket is in place, attach the reel mechanism to the bracket according to the manufacturer's instructions.
4. Mobile Air Hose Reel Cart
A mobile air hose reel cart is a convenient solution for transporting and using compressed air hoses around your workspace or job site. The cart consists of a sturdy frame with wheels which enables you to move the air hose reel to wherever you want.
Some air hose reel carts also feature storage compartments or racks for storing your air compressor tools.
A mobile reel cart allows you to easily transport the air hose and compressor to different locations. This eliminates the need for multiple hose setups. Moreover, you can use the cart indoors or outdoors, in workshops, construction sites, or other industrial settings. This provides flexibility for various applications.
Some considerations for a mobile air hose reel cart are:
Weight Capacity - Ensure the cart can support the weight of the air hose, reel, and any additional equipment you may store on it.
Terrain - Consider the terrain of your workspace or job site to ensure the cart's wheels are suitable for smooth mobility.
5. Under-Workbench Air Hose Reel
Under-workbench air hose reels help maximize space while organizing loose hoses off of the ground, where they could pose trip hazards. They also prevent hoses from getting knotted or tangled on the ground.
These reels are designed to save valuable floor and wall space, and may also feature a swivel mechanism that allows the reel to rotate 180 or even 360 degrees. This makes the air hose reel flexible and easy to use when operating your air compressor tool.
Moreover, the enclosed reel mechanism protects the hose from damage, prolonging its lifespan and ensuring reliable performance.
Some considerations to select a suitable work bench for this reel cart are:
Size and dimensions - Choose a workbench with dimensions that allow ample clearance for mounting the reel cart underneath.
Sturdiness and Stability - Opt for a sturdy and stable workbench that can support the weight of both the reel cart and any equipment or materials placed on top.
Mounting options - You also have to consider the mounting options available on the selected workbench. Try to look for workbenches with built-in mounting provisions or those that are compatible with aftermarket mounting brackets.
6. Block Wall-Mounted Air Hose Reel
Hose reels mounted to walls save floor space while being easy to access, and are frequently found in auto and welding shops. The reel is equipped with a sturdy mounting bracket designed specifically for attachment to block walls. This bracket provides a secure and stable mounting point for the reel which ensures reliable performance.
The reel features a retractable hose mechanism that allows you to pull out the length of the air hose you want, and also retract it back when not in use.
Block walls provide a stable and secure mounting surface for the reel, ensuring it stays in place during use. In addition to this, the reel's location on the wall makes it easy to access compressed air whenever needed, enhancing productivity and convenience.
Steps to set up a block wall-mounted air hose reel are discussed below.
Select a Location - Choose a suitable spot on the block wall where you can easily access the air hose and where the reel won't interfere with other equipment or structures.
Prepare the Surface - You will have to clean the mounting area on the block wall to ensure proper adhesion and secure attachment.
Attach the Mounting Bracket - Try to use appropriate anchors or fasteners to securely attach the mounting bracket to the block wall, following the manufacturer's instructions.
Install the Reel - Once the mounting bracket is in place, attach the reel mechanism to the bracket according to the manufacturer's instructions.
7. Custom-Made Air Hose Reel Storage Solutions
Manufacturers create hose reels to provide users with an efficient means to stow away their hoses and cords off the ground, organized, unkinked and out of harm's way. These custom-made solutions are designed to meet specific requirements and preferences. This ensures they fit seamlessly in your workplace.
Moreover, depending on your needs and budget, custom-made storage solutions can be crafted from various materials such as steel, aluminium, or wood. Custom-made air hose reel storage can also be designed in such a way that they integrate with your existing shelving units, wall-mounted systems and even workbenches.
Some considerations for a custom-made air hose reel storage solution are:
Budget - Although custom-made solutions may cost more, they offer long-term value and functionality.
Timeline - The design and fabrication process for custom solutions may take longer than purchasing premade options. Thus, it makes sense to consider your timeline and project deadlines.
Introducing BluBird Air Hose Reel 3/8" Retractable Dual Arm Heavy Duty with Rubber Hose
If you are searching for a quality air hose reel, then your search ends with BluBird. Our air hose reel is crafted from industrial-grade powder-coated steel which makes it both durable and resistant to cracks and wear.
It is equipped with brass swivel joints which prevents leaks, and is accompanied by a reel stopper and 4 non-snag rollers.
The top unmatched features of our air hose reel are mentioned below:
- 2-year warranty
- 18-gauge powder-coated steel construction
- Solid brass fittings
- Can be mounted on walls, ceilings, floors, trucks and trailers
- Includes a 3’ Lead-in Hose
Invest in an air hose that not only lives up to your expectations but also surpasses it!
Buy here now!
Final thoughts
Air hose reels can be mounted in different places with a bit of planning and having the right kind of tools. Moreover, mounting your air hose reel protects it from external elements, and allows for easy winding and retraction.
So, the next time you plan to get an air hose reel, make sure you check out the various mounting options listed above. This will ensure your air hose reel is protected and lasts you for a long time.
